Face-Recognition-Terminal-official-websi

THE ERA OF FACE RECOGNITION


Authorized access has come a long way from using keys, pin codes, cards, and fingerprints. We now find ourselves stepping into the era of face recognition.


The use of face recognition in access control and time attendance has been an inevitable trend, which creates advantageous “touch-free” experience. With advanced deep learning technology and practical functions, Hikvision MinMoe Face Recognition Terminals bring better security and improved efficiency to access control and time attendance tracking, making them easier than ever!

Watch video

Product Highlights

Superior Recognition in Any Environment

Fast, accurate recognition, even in darkness

Hikvision MinMoe Face Recognition Terminals are powered by a deep learning algorithm, which increases accuracy of face recognition to over 99% and enhances verification speeds to under 0.2 seconds. The enhanced verification rates and accuracy ensure a pleasant, “touch-free” experience for users – a vast improvement over swiping ID cards or fingerprint scans. 

 

Furthermore, MinMoe Face Recognition Terminals perform well in low- and even zero-light environments. 

Top Level Security
 

Better security with face anti-spoofing 

Equipped with dual lenses – a visible light lens and an infrared lens – MinMoe Face Recognition Terminals will only grant access when both lenses detect the same person, as well as determine whether the face is actual, not an image. This anti-spoofing technology makes access control management much safer and prevents most attendance fraud

Easy to Manage and Operate

Multiple linkages and third-party integration options

Along with door linkage, MinMoe Face Recognition Terminals can be linked with NVRs for data recording and storage. They can also be linked with network cameras to allow clear video recording of the scene when any pre-set events are triggered. Meanwhile, MinMoe products provide an abundance of third-party integration options for extensive compatibility, allowing quick and cost-effective connections between MinMoe Face Recognition Terminals and customers’ existing door control and attendance systems.

Face Recognition Terminals & Temperature Scanning

for access control

Ultra Face Recognition Terminals

  • Supports Vanadium Oxide uncooled sensor to measure target's temperature

  • Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: 0.1 ° C, deviation: ± 0.5 °C

  • Recognition distance: 0.3 to 2 m

  • Fast temperature measurement mode: Detects face and takes temperature without identity authentication

  • Multiple authentication modes are available: card and temperature, face and temperature, card and face and temperature, etc

  • Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid

  • Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed

  • Displays temperature measurement results on the authentication page

  • Triggers voice prompt when detecting abnormal temperature

  • Configurable door status (open/close) when detecting abnormal temperature

  • Transmits online and offline temperature information to the client software via TCP/IP communication and saves the data on the client software

  • Face recognition duration < 0.2 s/User; face recognition accuracy rate ≥ 99%

  • 50,000 face capacity, 50,000 card capacity, and 100,000 event capacity

  • Suggested height for face recognition: between 1.4 m and 1.9 m

  • Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out

  • Watchdog design and tamper function

  • Audio prompt for authentication result

  • NTP, manually time synchronization, and auto synchronization

  • Connects to external access controller or Wiegand card reader via Wiegand protocol

  • Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed

  • Imports and export data to the device from the client software

  • * Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes.

  • * In order to get an accurate temperature, after the device is powered on, you should wait for 90 min to warm the device up.

Application Scenarios

DS-K1T671TM-3XF

Hikvision Face Recognition Terminal with Temperature Screening Function

  • Supports Vanadium Oxide uncooled sensor to measure target’s temperature;

  • Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F),

  • accuracy: ± 0.5 °C without black body calibration;

  • Recognition distance: 0.3 to 2 m;

  • Fast temperature measurement mode: Detects face and takes skin-surface temperature without identity;

  • Multiple authentication modes are available: card and temperature, face and temperature, card and face and temperature;

  • Face mask-wearing alert;

  • 7-inch LCD touch screen; 2-MP wide-angle lens;

  • Built-in Mifare card reading module; Max.50,000 faces capacity, Max.50,000 cards;

  • Verification methods: Supporting fast temperature measurement and face/card recognition with temperature screening;

  • Authentication distance: 0.3-2 m; Temperature range: 30-45℃,

  • accuracy: ±0.5℃; Supports 6 attendance status, including check-in, check out, break-in, break out, overtime in, overtime out;

  • Without power supply.

ISD-SMG318LT-F

Temperature Measurement Walk-Through Detector

  • Temperature exception detection

  • Linkage for audible alarm

  • Uncooled sensor, resolution: 160 x 120

  • Supports dual-light fusion image

  • Supports visible light and thermal imaging frame over lay

  • IP66 protective level

  • Detection accuracy: metal in the size like a clip (or 1/2 clip) is detectable on the middle of the detector. Goods like Belt buckle can be excluded. Copper, aluminum, and zinc (over 150 g) , controlled knife, and gun are detectable

  • Multi-area alarm: Indicates the metal position on the body. Max. 18 areas

  • Adopting the thermal imagery technology, this detector realizes non- contact temperature measurement.

  • Face detection function of the camera makes accurate positioning of the measurement possible. The detector also supports metal detection.

  • It is suitable for safety inspection of dangerous goods and is widely used for public occasions and in important places, etc. It is recommended to be used indoor with a windless environment.

  • Non-contact temperature measurement: face temperature measurement with accurately personnel matching.

  • Temperature accuracy: ±0.5 ℃,

  • detection distance: 0.3 to 3 m, target height: 1.45 m to 1.85 m;

  • Temperature filtering: adjustable temperature threshold.

  • An over-threshold temperature will trigger the audible strobe light; Counting display: displays the walk-through people number, metal alarm times, real-time temperature, number of people in abnormal temperature; Metal detection: metal likes a clip.

Tel. +27 87 094 5066

info@avtec.co.za

  • Facebook Social Icon

© 2020 Avtec

Monnit and the Monnit logo are trademarks of Monnit Corporation