Various types of sensors available

Wireless Standard Temperature Sensors

The ALTA Wireless Temperature Sensors uses a type NTC thermistor to measure temperature. The sensor outputs the ambient temperature in degrees Fahrenheit. The sensor is accurate to ± 1° C (± 1.8° F). Increased accuracy to ± 0.25° C (± 0.45° F) can be accomplished with user calibration.

​

Battery / Enclosure          Part Number

AA                                      MNS2-8-W2-TS-ST

Coin Cell                            MNS2-8-W1-TS-ST

Industrial                            MNS2-8-IN-TS-ST

​

Datasheet

Wireless High Temperature Sensors

ALTA Wireless High Temperature Sensors use an RTD to accurately measure temperatures from -50°C to +370°C. The solution is perfect for high temperature critical applications such as ovens, heaters, furnaces and boilers. 

Battery / Enclosure          Part Number

AA                                      MNS2-8-W2-TS-HT-L03

Industrial                            MNS2-8-IN-TS-HT-L03

Datasheet

Wireless Low Temperature Sensors

ALTA wireless Low Temperature Sensors use an RTD to accurately measure temperatures from -200°C to +162°C. This solution is recommended for medical grade coolers that cool at temps colder than -40C, cryogenic applications, as well as standard freezers and refrigerators.

Battery / Enclosure          Part Number

AA                                      MNS2-8-W2-TS-LT-L03

Industrial                            MNS2-8-IN-TS-LT-L03

Datasheet

Wireless Duct Temperature Sensors 

Wireless Duct Temperature Sensors in commercial, enterprise, and industrial-grade housings are available for duct monitoring. Each duct temp sensor features a probe temperature range of -40°C to +150°C (-40°F to +302°F) and an NTC type thermistor with UL listed plenum cable for superior accuracy.

Battery / Enclosure          Part Number

AA                                      MNS2-8-W2-TS-DT-L08

Coin Cell                            MNS2-8-W1-TS-DT-L08

Industrial                            MNS2-8-IN-TS-DT-L08

Datasheet

Wireless Digital Temperature Sensor

Monnit’s ALTA Digital Temperature Sensor has a range of -40°F to +257°F (-40°C to +125°C) to support cold food storage, clinical vaccine storage, research labs, and other health-related fields. 

Battery / Enclosure          Part Number

AA                                      MNS2-8-W2-TS-SD-L03

Datasheet

Wireless Humidity Sensors

ALTA Wireless Humidity Sensors allow you to monitor the relative humidity of the air within a room or enclosure. This solution is ideal for monitoring humidity within greenhouses, industrial spaces, museums, saunas, and humidors. They can also be used for residential applications such as controlling mold, mildew, or dust mites.

Battery / Enclosure          Part Number

AA                                      MNS2-8-W2-HU-RH

Coin Cell                            MNS2-8-W1-HU-RH

Industrial                            MNS2-8-IN-HU-RH

Datasheet

Wireless Open / Closed Sensor

ALTA Wireless Open / Closed sensors provide information on the status of doors, windows, cabinets, etc. Know if a building or area is being accessed when it should not be, or if a door or window has been left open.

Battery / Enclosure          Part Number

AA                                      MNS2-8-W2-OC-ST

Coin Cell                            MNS2-8-W1-OC-ST

Industrial                            MNS2-8-IN-OC-ST

Datasheet

Wireless Infrared Motion Sensor

Monnit’s Wireless ALTA PIR Motion Sensors detect motion via passive infrared (PIR) technology to augment facility security, protect inventory, or optimize building services through usage data.
 

Battery / Enclosure          Part Number

AA                                      MNS2-8-W2-MS-IR
AA (Wide Angle)                MNS2-8-W2-MS-IR-WA
Coin Cell                            MNS2-8-W1-MS-IR

Datasheet

Wireless 20 Amp AC Current Meter

This low power, 20 Amp AC Current Meter remotely audits power consumption. The electric power draw of servers, vending machines, or workout machines can all be monitored using this current transducer.

Battery / Enclosure          Part Number

AA                                      MNS2-8-W2-CM-020
Industrial                            MNS2-8-IN-CM-020

Datasheet

Wireless 150 Amp AC Current Meter

​

Remotely monitoring your business with a 150 Amp AC Current Meter opens up many possibilities. This is enough to measure the power consumption of server systems and current used by low to medium power industrial equipment. 

Battery / Enclosure          Part Number

AA                                      MNS2-8-W2-CM-150
Industrial                            MNS2-8-IN-CM-150

Datasheet

Wireless 500 Amp AC Current Meter

​

A one-phase high power 500 Amp AC Current Meter is ideal for measuring commercial generators’ power consumption, heavy duty industrial equipment, or main breakers in industrial and commercial breaker panels.

Battery / Enclosure          Part Number

AA                                      MNS2-8-W2-CM-500
Industrial                            MNS2-8-IN-CM-500

Datasheet

Wireless Light Meter

These sensors enjoy a broad customer base because they help protect light-sensitive materials and irreplaceable art, enhance crop yields, and even play a vital role in security.

Battery / Enclosure          Part Number

AA                                      MNS2-8-W2-LS-LM
Industrial                            MNS2-8-IN-LS-LM

Datasheet

Wireless 20 Amp Three-Phase Current Meter

​

Incorporate this 20-amp Three-Phase, revenue grade device into facilities relying on powerful devices and systems, such as machine shops. Remotely monitor power consumption to track motor health or power system faults. Monitor min/max RMS current, duty cycle of each phase combined amp hours, and other metrics.

Battery / Enclosure          Part Number

Industrial                            MNS2-8-IN-3P-020

Datasheet

Wireless 150 Amp Three-Phase Current Meter

​

Remotely monitoring your business with a 150 Amp AC Current Meter opens up many possibilities. This is enough to measure the power consumption of medium to heavy duty three-phase systems: environmental chambers, very large HVAC systems, or medium and heavy duty industrial motors.

Battery / Enclosure          Part Number

Industrial                            MNS2-8-IN-3P-150

Datasheet

Wireless 500 Amp Three-Phase Current Meter

​

Use this sensor and be alerted about imbalances or power faults. The sensor uses 3 x 0–500 amp current transducers to monitor the main power for commercial buildings.

Battery / Enclosure          Part Number

Industrial                            MNS2-8-IN-3P-500

Datasheet

Wireless Dry Contact Sensors

​

The ALTA Wireless Dry Contact sensor detects when there is contact between the two wired end points. It can easily be integrated into existing switches or contact plates. When the sensor detects contact between the two end points, it will immediately turn on the RF radio and transmit the data to the wireless gateway
and iMonnit Monitoring and Notification System.

Battery / Enclosure          Part Number

AA                                      MNS2-8-W2-DC-CF-L01
Coin Cell                            MNS2-8-W1-DC-CF-L01
Industrial                            MNS2-8-IN-DC-CF-L01

Datasheet

Wireless 20 mA Interface Current Meter

​

Easily update existing scientific or industrial sensors to wirelessly collect process data. Remotely monitor current transducers, as well as oxygen, pH, magnetic flow sensors, and more.

Battery / Enclosure          Part Number

AA                                      MNS2-8-W2-MA-020
Coin Cell                            MNS2-8-W1-MA-020
Industrial                            MNS2-8-IN-MA-020

Datasheet

Wireless G-Force Snapshot Accelerometer

​

The G-Force Snapshot sensor activates at a set time interval (defined by user) and measures g-force along X, Y, and Z axes. Primary use is as an inclinometer or tilt sensor.

Battery / Enclosure          Part Number

AA                                      MNS2-8-W2-AC-GS
Coin Cell                            MNS2-8-W1-AC-GS
Industrial                            MNS2-8-IN-AC-GS

Datasheet

Wireless Advanced Vibration Meter

​

The Advanced Vibration Meter uses an accelerometer to measure vibration and frequency on three axes. The sensor reports vibration (acceleration, velocity, displacement, or acceleration peak), frequency (Hz/RPM), and crest factor on all three axes. It also reports duty cycle (how much of the report interval that vibration was present), and temperature.

Battery / Enclosure          Part Number

AA                                      MNS2-8-W2-AC-ADV
Industrial                            MNS2-8-IN-AC-ADV-L10

Datasheet

Wireless 500 VAC Voltage Meter

​

Integrate a Wireless 500 VDC Voltage Meter to monitor the electrical status of items you depend on, like industrial lift trucks, solar PV panels, and power banks. Remotely monitor status and operation.

Battery / Enclosure          Part Number

AA                                      MNS2-8-W2-VM-500
Coin Cell                            MNS2-8-W1-VM-500
Industrial                            MNS2-8-IN-VM-500

Datasheet

Wireless 500 VAC Voltage Detection Sensor

​

Wirelessly monitor voltage for critical equipment and systems up to 500 VDC. Keep an eye on sprinkler systems, HVAC, power couplings, and sump pumps. Know about electrical faults and act quickly to keep business moving.

Battery / Enclosure          Part Number

AA                                      MNS2-8-W2-VM-500
Coin Cell                            MNS2-8-W1-VM-500
Industrial                            MNS2-8-IN-VM-500

Datasheet

Wireless Rope Sensor

​

The ALTA Wireless Water Rope Sensor detects the presence of water anywhere along the surface of the rope. The sensor comes with 10 feet of water rope. Additional 10 ft. sections are available and can be connected up to 100 feet.

Battery / Enclosure          Part Number

AA                                      MNS2-8-W2-WS-WR
Coin Cell                             MNS2-8-W1-WS-WR
Industrial                             MNS2-8-IN-WS-WR

Datasheet

Wireless Water Detection Puck

​

Housed in a vulcanized hockey puck, this submersible sensor detects water’s presence (ornon-presence). Drop this sensor nearly anywhere to monitor for leaks / spills, e.g., production,manufacturing, or building maintenance. 

Battery / Enclosure          Part Number

AA                                      MNS2-8-PK-WS-PS

Datasheet

Wireless Pulse Counters

​

The ALTA Wireless Pulse Counter can be connected to the pulse output of a system (water meter, power meter, etc.) to count the number of actuations within a given time frame. The wireless pulse counter is an electronic counter capable of counting passive (open/closed switch) or active (up to +15 VDC) pulses.

Battery / Enclosure          Part Number

AA                                      MNS2-8-W2-PC-01
Coin Cell                            MNS2-8-W1-PC-01
Industrial                            MNS2-8-IN-PC-01

Datasheet

Wireless 50 PSIG Pressure Meters

​

Monnit’s Wireless 50 PSIG Pressure Meters keep lab managers, field service engineers, and other professionals connected to processes and machinery. If line pressure deviates from user-set thresholds, this pressure sensor instantly alerts the user via a text, email, or call.

Battery / Enclosure          Part Number

AA                                      MNS2-8-W2-PS-050
Industrial                            MNS2-8-IN-PS-050

Datasheet

Wireless 300 PSIG Pressure Meters

​

Indispensable to facility managers, fabricators, and legacy machine operators, Monnit’s 300 PSIG Wireless Pressure Meter remotely monitors line pressures (gas, liquid, or vapors). If pressure exceeds user-defined limits, the user receives an alert via an email, call, or text.

Battery / Enclosure          Part Number

AA                                      MNS2-8-W2-PS-300
Industrial                            MNS2-8-IN-PS-300

Datasheet

Wireless Carbon Monoxide (CO) Sensor

​

This unique battery-powered sensor monitors job sites, offices, and residential com-plexes for carbon monoxide (CO). Within a small footprint, the MEMS-based device packs a 0–1,000 PPM measurement range and automated data logging.

Battery / Enclosure          Part Number

AA                                      MNS2-8-W2-GS-C1

Datasheet

Wireless Carbon Dioxide (CO2) Sensor

​

Trusted by facility managers, this MEMS-based sensor monitors CO levels in the air.Get an alert if CO
levels surpass preset limits. It’s used to protect indoor air quality in greenhouses, marine vessels, and HVAC systems.

Battery / Enclosure          Part Number

AA                                      MNS2-8-W2-GS-C2

Datasheet

Wireless Hydrogen Sulfide (H2S) Gas Sensor

​

This safety sensor tracks the presence of HS gas, which is toxic and flammable.Use to safeguard workers in oil / gas production, wastewater treatment, utilities, and other hazardous areas.

Battery / Enclosure          Part Number

AA                                      MNS2-8-W2-GS-H2S

Datasheet

Wireless Air Quality Sensor

​

This mount-and-monitor device measures particulate matter that’s coarse (PM10),fine (PM2.5), and ultra-fine (PM1) inside mines, production facilities, commercial kitchens and facilities, as well as business buildings. This unit is powered by line-power and has a battery backup. 

Battery / Enclosure          Part Number

AA                                      MNS2-8-W2-AQ-P25A-LPO

Datasheet

Wireless Air Velocity Sensors

​

The Air Velocity Sensor measures the pressure difference between two input ports, as well as ambient temperature and altitude to determine airflow speed in a system. Use in sensitive areas, e.g., hospitals and clean rooms.

Battery / Enclosure          Part Number

AA                                      MNS2-8-W2-PS-AV-LPO
Industrial                            MNS2-8-IN-PS-AV

Datasheet

Wireless Differential Air Pressure Sensors

​

This sensor measures the pressure difference between its two ports. Ideal for food service, healthcare, and academia. Common applications include clean rooms, pharmaceutical production, commercial kitchens,
and HVAC or applications where negative air pressure monitoring is required.

Battery / Enclosure          Part Number

AA                                      MNS2-8-W2-PS-DP-LPO
Industrial                            MNS2-8-IN-PS-DP

Datasheet

Wireless Industrial Ultrasonic Ranging Sensor

​

Packaged in a weatherproof housing, Monnit’s ALTA Industrial Ultrasonic Ranging Sensor measures levels or detects objects. Indoor and outdoor applications include vehicle / object detection, capturing liquid levels, and tracking inventory. 

Battery / Enclosure          Part Number

Industrial                            MNS2-8-IN-US-IN-MPL-PA

Datasheet

Wireless Food Probe Thermometer

​

The ALTA Food Probe replaces manual temperature checks and enhances food quality and safety by bringing the power of remote data collection to commercial kitchens, food production, and restaurants.

Battery / Enclosure          Part Number

AAA                                   MNS2-8-W2-TS-FP

Datasheet

Wireless Vehicle Detect / Counter Sensor

​

This easy-to-deploy sensor detects vehicle presence, counts traffic, and tracks the time a vehicle is parked. Ideal for fleet management, parking garages, service centers, curbside retail, and more.

Datasheet

Battery / Enclosure          Part Number

Industrial                            MNS2-8-IN-VS-TT

Wireless Soil Moisture Sensors

​

The Soil Moisture Sensor measures soil water tension (matric potential) and temperature. With a resistive granular matrix element, you can optimize your tension parameters to determine the earliest indication of water stress and make sure you irrigate before it reaches that point. The unique element feature delivers consistent calibration without needing to recalibrate for every installation.

The Sensor also has a thermistor-based temperature element. Its readings will help you assess temperature -40°C to 125°C and the moisture’s temperature compensation, eliminating the need to measure moisture every time the soil temperature changes.

Battery / Enclosure          Part Number

Industrial                           MNS2-8-IN-WS-WM-L05

Datasheet